|Home||» Products||» Scientific Laboratory Instruments||» Bio Safety Cabinet|
Biological Safety Cabinet Class II, Type B2, is completely designed and compliant to NSF/ANSI 49 to ensure safe operating environment. As per the standards it provides product, operator and environmental protection. This cabinet will have 100% exhausts through dedicated ductwork. All inflow and down flow air is exhausted after HEPA filtration to the external environment without recirculation within the cabinet. The entire volume of exhausted air is a mix of down flow and inflow. The inflow is taken into the cabinet through the front perforations provided in the work table to maintain the required negative pressure in the work area. Both the down flow and the exhaust air volumes are handled by two appropriate separate blowers which are interlocked. In the event of failure in the exhaust blower, the supply blower will cut off immediately without any delay to avoid the positive pressure in the work zone and protects the personnel getting exposed to the harmful particulates handled in the cabinet. The cabinet protects the personnel, product and the environment from particulates. This equipment is suitable for general microbiological work with agents assigned to biological safety levels 1, 2, and 3. The cabinet is ergonomically designed for maximum user comfort to meet the requirement of the ADA.
Material of Construction : Galvanized Steel Epoxy Powder Coated
Internal dimensions : 900W x 500D x 600H mm (3’ x 2’ x 2’)
Working Table : Stainless Steel 304 grade.
Air Balancing : 100 % exhaust & 0% re- circulation
Side Panels : Sidewalls are made from Polycarbonate clear sheet.
Front Door : Clear UV resistant polycarbonate sheet- vertical sliding.
Direction of Air Flow : Vertical
Pre filter : 100% synthetic polyester efficiency 90%, Retention 30 micron.
HEPA filter : 99.99% down to 0.3 micron
Cleanliness Level : Better than Class 100
Noise level : Not > 65 decibel
Blower Assembly : Single Phase 220V, 1440RPM directly, 600W/180W
Ultra violet Lamp : Philips OR equivalent - 1No
Illumination : Fluorescent tube - 1 No, 36 watts.
Pressure gauge : 0-25 mm Magnahelic – 1#
Castor Wheels : For Mobility
Power requirement : 220 V , 50Hz, Single Phase
Minimum Order Qty : 1 No.
Area of Service : All over India