|Home||» Products||» Scientific Laboratory Instruments||» Vertical Laminar Air Flow|
Vertical Laminar Air Flow
The room air is taken through the top of the cabinet through the pre filter, which traps larger size particles and increase the life of main HEPA filter.Air is forced evenly through the HEPA filter, resulting the stream of unidirectional clean air within the work zone of the cabinet.A nominal filter face velocity of 0.45m/s or 90 fpm (+/- 10%) ensures the sufficient number of air changes within the enclosed area of the cabinet in order to maintain cleanliness.The filteredAIR TRAVELS across the internal work zone of the cabinet in unidirectional vertical stream and leaves the main work chamber across the entire open front of the cabinet. The main body is constructed out of galvanized steel with an abrasive resistant white epoxy powder coated finish.Easy to clean SS 304 grade worktop will never rust, chip or generate particles.Permanently
lubricated direct drive centrifugal blower[s] have extremely low noise and vibration levels, and are suspended on springs. The cabinet control system consists of separate switches for blower, white light and U V Tube.Inclined tube manometer is FITTED on either side of the unit for continuous monitoring of the pressure built up on the HEPA filter. Protective grills are provided for both the filters to avoid accidental damages.
White light is provided at the rear end of work area which gives excellent diffused illumination throughout the work zone. Superior electrical safety is assured for the operator, as all cabinets are factory tested after production.All components are chemical resistant in nature, for longer life and durability. All cabinet components are clean room compatible.